From R12,535.00
Looking for a mouldable cushion to accommodate your unique seating posture? Look no further. This cushion uses a vacuum method, whereby air is removed from the cushion using a pump and it hardens into the desired shape. The moulding of the cushion can be easily modified by allowing air back into the cushion and restarting the moulding process. This feature allows for serial moulding, making this cushion ideal for children and adults, whose positioning needs may change over time.
This seat cushion with high lateral supports and a thigh abduction wedge, allows for more support to be provided for the user. The abduction wedge reduces contractures of adductors and maintains the lower limbs in the correct position. The high lateral supports and the anatomical shape of the cushion also prevents an anterior pelvic tilt and provides an appropriate surface for the bony prominences. Reducing the risk of developing pressure sores. The shape of the cushion can be adjusted easily if necessary.
The main benefit of the bodymap cushion is that it can be moulded into any desired shape. Allowing you to be able to accommodate and/or correct various types of postural deformities. The cushion also ensures that the individual is always seated in a certain position. This prevents the development secondary complications that can arise from incorrect seating.
This valve controls the amount of air in the bodymap cushion. Removing air from the cushion by using the supplied pump, allows the cushion to be moulded to the desired shape. Remove the silver nozzle from the end, with a simple click, to allow air to flow back into the cushion and for the cushion shape to be changed/corrected.
The servicing valve can be found on the bottom of the cushion. It allows for the granules in the cushion to be easily increased or decreased. This is dependent on the individual needs and the type of moulding that is needed. It also allows for the top-up of granules after months of use.
This small hand pump comes with the cushion and is used to mould the cushion into the desirable shape. It clips into the inflation valve easily and you pump it to remove air from the cushion.
It is recommended when you start moulding the cushion, that you connect the pump and remove some air from the cushion. This process allows for more accurate moulding than starting with a very soft cushion.
|
|
12″ – 17″ |
|
24cm – 54cm |
|
5cm |
|
|
|
Cushion Cover Included |
Yes |
Q: How do Bodymap cushions prevent pressure sores if the surface hardens as air is removed?
A: The cushion is moulded to the individual unique posture. This ensures that pressure is distributed evenly across the full seated surface. This prevents there from being any single pressure points.
Q: Why is serial moulding useful?
A: Serial moulding is can be used to maintain postural gains that are achieved through therapy. The cushion can be remoulded as range of a joint improves.
Q: How do you wash clean a Bodymap cushion?
A: You can regularly use a dry brush or vacuum cleaner equipped with attachment made of soft bristles. If stains are big, you can use soap and warm water. Rise with running water and dry with a towel. Do not use direct heat to dry the cushion. Be careful to not to puncture the cushion while cleaning.
Download the Cleaning and Maintenance Instructions
When you purchase your wheelchair and various mobility devices, ensure your supplier has the repair and service backup you will need in the future. We carry spare parts for all our products and with trained technicians to service and repair any product you purchase from us, you can rest assured that your product will last many years in the future
Contact any of our branches for pricing and availability on spare parts.
